Parts & Accessories
Burley's Stroller Kit easily converts Burley's child and pet trailers into strollers, making it possible to walk and jog with them. It includes a stroller wheel that folds up for convenience as well as a parking brake and wrist tether for security. • Stroller wheel stays attached and folds up out of the way when cycling • Tool-free adjustment makes switching from bike to stroll mode simple • Adjustable tracking makes for consistent, easy rolling • Burley's easy-glide tow bar retracts closer to the trailer for easy maneuverability • Stroller wheel pushes easily Compatible with: 2007-Current D'Lite 2007-Current Encore 2007-Current Solo 2007-Current Cub 2007-Current Honey Bee 2008-Current Tail Wagon
Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.
Classic roll-top design and heat-sealed seams make this spacious 75-liter dry bag totally waterproof. Constructed with 500D tarpaulin fabric that is both tough and lightweight. Includes shoulder strap and carry handles. - Capacity: 75 liters - Weight 2.62 lbs. - Shoulder strap and carry handle - Designed for Burley Coho XC and Flatbed bike trailers
Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Replacement safety flag for extra visibility.
The Coho Pannier Rack allows for the attachment of panniers to the fender of the Coho XC. The 10mm bar allows for use with many different types of panniers. Pair the Coho Pannier Rack with the Burley Pannier Set for even more carrying capacity on your Coho XC. - Specially designed for use with the Burley Coho XC - Easy installation - Compact form factor
Burley’s official adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. The Burley Thru Axle is a requirement for any axle mounted hitch system with a bike that has a 12mm thru axle. Burley's new Thru Axles have an external male threading on the end to accommodate the installation of our axle mounted hitch system.
Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.
The Solstice Handlebar Console adds easily accessible storage space to your Burley Solstice jogging stroller. Keep your essentials in arms reach with compartmentalized spaces for a water bottle or coffee, phone, keys and other small items. – Weather resistant pocket to protect important items like cell-phone and/or wallet. – Two cup holders with ability to adjust the depth to accommodate either a small cup or large water bottle. – Large center compartment allows numerous items to be close at hand (fits small tablets). – Compatible only with Solstice stroller.
Don’t let your adventures be limited to the pavement. The 16+ Wheel Kit improves handling over snow, sand and gravel. The kit includes two 16x3” push button wheels with a knobby tread. A wide range of acceptable tire pressures let you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps for your passengers. Say goodbye to the sidewalk. Constructed with aluminum rim/hub and stainless steel spokes.
The Premium Seat Pad provides cushioning with an adjustable headrest to keep your little one comfortable and supported. The hand-washable padding is easily removed for cleaning. - Seat and shoulder strap padding - Headrest for added support - Removable and hand-washable - Includes: Seat Padding, Shoulder Strap Padding, & Headrest - Compatible with 2016-Current child trailers
Turn your Thule Glide/Urban Glide into a car seat transporter with Thule's Thule Infant Car Seat Adapter. This attachment is compatible with most infant car seats and allows you to face your baby while strolling.
Convert your Thule Chariot into a high-performance jogging stroller. - Simple installation by clicking the kit into Thule VersaWing - Convenient tracking adjustment to make sure the carrier tracks straight - Includes pocket for easy storage of the jogging wheel when not in use
Burley's Flex Connector joins the trailer to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily letting you lay down the bike. Includes safety strap and retaining pin.
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Two roll-top, waterproof panniers keep gear dry and organized. Compatible with all 10mm rack bars and have a combined capacity of 22 liters. Bright colors and reflective patches provide increased visibility. Constructed with 500D waterproof tarpaulin with heat-sealed seams. - Waterproof - Compatible with 10mm rack bars - Large reflective patches - Easy-to-use carry handle - Combined weight: 2.09 lbs.
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
Burley's Nomad Cargo Rack is made of lightweight, sturdy aluminum and mounts easily to your Nomad trailer (sold separately) so you can expand your carrying capacity and haul even more stuff on your journeys. Now there's no excuse to leave anything home!
$24.99 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.
Surly Trailer Parts
Keep your little one’s favorite treats and drinks at hand with this innovative cup holder and snack bowl set for the Burley Solstice. The cup holder and snack bowl each clip into place individually, and conveniently swivel out of the way to make it easy to get your child in and out of the stroller. -Made from food-grade material. -Once installed, the cup holder and snack bowl are easy for your child to access while seated, but swivel so they are out of the way when taking your little one in and out of the stroller. -Cup holder fits most brands of child cups. -Snack bowl has an attractive lid with tether, making it easy to transport snacks from the house to the stroller without spills.
The Burley Ballz Nutted Axle Adapter includes a set of threaded Ballz that replace the nuts on your current nutted axle, enabling compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with nutted axles. - Official Burley Ballz adapter for bikes with nutted axles - Two Burley Ballz that thread onto the existing nutted axle - Quick and easy one-time installation - Specially designed for use with the Coho XC
• 4 piece sleeve set for Adams Trail-A-Bikes • Includes new shim for oversized seatposts from 25.4mm to 35.0mm and above
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Enables connection of the Coho XC trailer to bikes with QR skewers. These QR skewers replace the existing QR skewer on your bike to enable compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with QR skewers. The standard version of this skewer is included with the Coho XC out of the box. - Easily replace your rear QR skewer to attach the Coho XC - Quick and easy installation - Specially designed for use with the Coho XC
Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.
• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims
Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side quick-release nut and once it's in place, the Burley hitch is installed to the adapter.
Page 1 of 2 Next page