Other

A neat little gadget, that is particularly interesting for anyone who likes to wrench on their bike. Designed like an ordinary headset spacer, the Aimy slides onto the steerer tube and has a stainless steel bolt that clamps down so that the steerer tube cannot fall through your headset, once you take off your stem. - Machined from aluminum - Fits 1-1/8" steerer tube - Thickness: 8mm - Weight: 8g

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

With our Yokes, we offer a clever solution that allows you to replace your Specialized rear shock with a regular standard sized shock. Yokes are CNC-machined from a single piece of 6061-T6 aluminum and anodized in a stylish black finish. Converting the Yoke is fairly easy, as all the necessary parts are included in the scope of delivery or can be taken directly from the bike. Fits: Epic 2021-2024 models Includes: 1x BikeYoke EP03 1x DU bushing 1x reducer 1x stainless steel bolt Matching shock dimensions: - 210x52.5 - 210x50 (note: rear travel will be reduced by approximately 5mm)

This BikeYoke allows the use of a standard shock in your Specialized bike. Stumpjumper 2010-2015 Includes: - 1x BikeYoke SJ01 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

An effortlessly subtle and minimal design that keeps your seat post secure and adds the last splash of colour to your build. No edge left unsmoothed, and no detail overlooked. Even the split in the back has been machined wide enough so there’s no need to detach your dropper cable, which makes installation a breeze. A stainless-steel bolt gives reliable clamping power and ensures no rust even in the grimmest conditions. - Stainless Steel Hardware - 6061-T6 Aluminium - Weight: 22g

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 3 - 50 Durometer, Soft

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 5 - 60 Durometer, Medium

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 7 - 70 Durometer, Firm

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 9 - 80 Durometer, X-Firm

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. Elastomer #1 - 40 Durometer, X-Soft Compatible with eeSilk+

RockShox Volume Reducer Kits

- Routes cables underneath the bottom bracket - Will not rust or corrode

CNC machined 6061 aluminum Black anodized finish Thru Axle Thread Pitch M12x1.75 Santa Cruz: 04-16871, 23-15651 Includes DO nut 23-16458 Juliana Quincy 1 - 2022+ Santa Cruz Stigmata 2 - 2015-2019 Stigmata 3 - 2019-2023

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Headset Microspacer - .25mm height each

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.

1/2" X 1/8" -Pin Length: 9.2 mm

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

Volume Spacer tuning kits for FOX suspension fork service and repairs.

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Dog bone washer designed for use with rear flat mount brakes. It helps ensure proper alignment and secure mounting of the brake caliper to the frame.

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Model: Replacement bolt - Compatibility: Allen, M5x16

Volume Spacer tuning kits for FOX suspension fork service and repairs.

Replacement piston and seals for Hope disc brake calipers.

Hope Brake Lever Parts

Replacement piston and seals for Hope disc brake calipers.

The Gyro G3 upper top plate is designed for use with the G3 detangler.

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

- Crown Race MX - Size: MX TH 26.4mm

- Rubber - Color: Black

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

- Aheadset preload adjusting bolt

FSA Mega Exo Small Parts.

FSA Standard Headset Bearings