Fenders

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus the hardware is pre-installed for quick mounting.

Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.

Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets. - 30 mm wide to fit 700x23 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 454 g (16 oz) - Lifetime PDWarranty The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets. - 45 mm wide to fit 700x35 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 567 g (20 oz) - City size installation manual (PDF) - Lifetime PDWarranty

Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details: - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

The ultimate clip-on mudguard set for road bikes for tire widths up to 25mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. The superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included. Disc brake compatible: Please be mindful of the brake wire.

The Velo 65 Mountain 29 is an ideal front and rear fender retro fit kit for 29" mountain bikes. Its practical universal mount makes it easy to securely attach to a wide range of bikes. The included U-stay kit provides fender stability. Suitable for tire widths up to 2.35". - Features a safety release on the stay mount

This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.

These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA

Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)

Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders! Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus, the hardware is pre-installed for hassle-free mounting.

Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

Mudrocker Rear Fender for MTB protects you AND your suspension and linkage from water and mud. Provides excellent coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" The fender attaches to the seat stays with hook and loop straps (or cable ties if perferred). With the included frame adapter pads, user can adjust the angle of the fender. The included rear extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. Perfect companion with the Mudrocker Front Fender. (If you lose your Adapter Pads or your Extender, they are both sold separately as well.) - Measurements: 840mm - Weight: 172 grams - Made in Germany

S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm

MTB+ and Fat Bike compatible - Fits up to 4" tires - 100% recyclable Polypropylene construction - Lightweight, durable, and easy to install/remove

The Grunge front fender was made for your messiest dirt adventures. It's super durable and provides exceptional coverage from mud, crud and spray. Its 3.4-inch wide profile and innovative steer tube mounting system will work on most suspension and rigid forks. - Durable all-weather polypropylene blade - Mounts to most suspension and rigid forks - Includes hardware to fit small, standard and oversized tapered steerer tubes (18.5-34.5mm ID) - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Dimensions: 85mm wide x 600mm long - Max tire width: 2.1" - Weight: 160 grams

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch

- Suitable for tire widths between 23mm and 42mm - Cable routing friendly - Not recommended for use with non-housed/exposed rear brake cables - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Front - Fender Size: 390mm x 110mm - Wheel Size: Universal - Material: Polypropylene - Weight: 30g

The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Made of sturdy anodized aluminum and adorned with laser graphics, the full Metal fenders are a beautiful complement to any bike with 27.5"/650b or 29" sized wheels and room for extra clearance. The 27.5x2.5" Full Metal Fenders can fit up to 650x56mm or 27.5x2.2" tires maximum. They come with special extra long hangers designed to better fit 650b/27.5" frames and forks. The 29x2.5" (700x65mm) Full Metal Fenders will fit bikes with 29x2.2" tires maximum. They come with special double rear alloy stays that add stability and prevent rattling over larger tire sizes. The double rear stays add stability and prevent rattling. They provide full-wrap coverage, even shielding your shoes and riders on your rear wheel thanks to extra long and super flexible polypropylene mudflaps. Safety release tabs ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Full Metal Fenders easily mount to bikes with eyelets using all stainless steel hardware which may be replaced as needed. Specifications: -65 mm wide to fit 650bx56mm (27.5x2.2) tires maximum -2.5"/65mm mm wide to fit 29 x 2.2" tires maximum -Weight: 730 grams -Lifetime PDWarranty

The Stingray mudguards supplement SKS's Bluemels range in the accustomed quality with modern colors in a matte design. First-grade plastic with an aluminum core for high-impact resistance. The stays feature quick-mounting fixed end caps. These fenders feature an elegant matte finish, edge protectors, and an automatic stay release safety system for the front. - Same features as the Commuter II fenders with the addition of colors and blacked out V-Stay - Fits tires 700 x 28-37mm - 45mm profile width

You only need a couple of seconds to protect yourself and your bike from wet weather. The Clip-On Fenders are made of a durable all-weather polymer so never again will you arrive at work with a rain streak up your back again. And because they're clip-ons, you can easily remove the fenders on sunny days.

Keep the road grime off your clothes, and arrive in style, with a durable fender set made specifically for the Turbo Como. It's all dry roads from here. - Durable fender set that's specifically designed to fit the Turbo Como. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and specific alloy hardware ensure the perfect fit for your Turbo Como. - Front fender supports Plug + Play mounting. - Front Length: 790mm - Rear Length: 1180mm

Fear the rain no more, have fun and stay dry with Specialized's Plug and Play Fender Set!

Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams