Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
- Keep your toes warm, cozy, and dry in the wind or rain with 100% neoprene - Slip them over the front of your cycling shoes and cleats for a stay-put layer of cozy thermal protection
• Replacement ratchet set for Louis Garneau's Monte shoes (sold separately) • 2 pieces
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
If you lost or damaged the Warp Sleeve on S-Works Sub6 road shoes, you have no reason to fear—Specialized has the replacement. Pick up a pair and start saving those seconds again.
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
Protect your feet from the elements with the Thermax II. This shoe cover provides high insulation from the cold and is very water resistant. The Thermax II offers maximum visibility thanks to reflective accents located at the front, rear and side. DETAILS: - Fabric: All seam-sealed 3 mm super stretch neoprene laminated with fleece - Under sole: Under opening with Velcro for easy adjustment and reinforced rubber for durability - Side opening: Side Velcro with safety puller for easy slip-on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
If the sun is shining, why not go for a ride despite the cold? The Wind Dry 2 is an excellent wind-breaker that will protect your feet from the cold so you can extend your riding season safely thanks to reflective accents on all sides. DETAILS: - Fabric: WIND DRY fabric blocks cold while providing breathability - Neoprene cuff: Better fit and prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - HiViz360: Reflectors at rear, front, and sides for optimum visibility
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
Power saving, round pedal stroke and a healthy foot arch make the SQlab insoles a must for every foot in a cycling shoe! Suitable for all cycling shoes, but also for normal shoes which are used for cycling, as well as for other uses. Developed in collaboration with ex-runner-up triathlon World Champion and foot expert Bjorn Gustaffson, SQlab has developed insoles that support the specific requirements found in cycling for the weaknesses of the respective foot type.
The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: ELITE Softshell provides superior wind and water protection Simple pull-on design Reflective elements for low–light visibility Recommended for road shoes with external cleats Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is Specialized's Deflect Comp Shoe Covers. Compared to the Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, they also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation and protective warmth in chilly conditions. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes.
These 3mm stackers can easily correct the common issue of leg length inequality. - External cleat lift for addressing leg length inequality - Shaped to fit SPD SL, Look KEO and Speedplay - Includes longer screws - Package includes 4 cleat stackers
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. -Fits 2012 and earlier S-Works shoes -Fits all Pro Road shoes -Heel lug only -Sold in pairs; includes screws
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low profile - Replaces without tools
Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. •Fits 2013 and 2014 S-Works Road shoes •Heel lug only •Sold in pairs; includes screws
Specialized's BG Footbeds were developed by biomechanical expert, Dr. Andy Pruitt of the Boulder Center For Sports Medicine. Their amazing, ergonomic shape increases power, endurance, and comfort, while optimizing hip, knee, and foot alignment. You'll be amazed how much nicer your shoes fit and feel! - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment. - External varus/valgus cleat wedge - Provides one-degree of varus/valgus correction - Shaped to fit SPD SL, Look KEO and Speedplay - Package includes eight wedges
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Replacement S-Works 7 Heel Lug
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
Page 1 of 2 Next page